
Brake Caliper Seal Set (Pressure Seal-Dust Seal)-Internal Diameter (I.D) 43mm
View the Fitment tab below for compatible motorcycles and fitment notes.
Brake Caliper Seal Set
- 1 x Pressure seal, 1 x Dust seal
- Internal Diameter = 43.0mm
- For use on O.D pistons 43.0mm
EPDM Seals - EPDM is the only choice for seals in braking systems using a glycol-based or silicone-based DOT-approved or pure racing brake fluid. If a seal is made for automotive brake systems and the material is not specified, you can safely assume it is EPDM.
Includes Red Rubber Grease We include our red rubber grease specially designed for brake projects, providing lubrication for assembly, protect from dry burn, and prevent swelling and hardening of rubber hydraulic component seals.
Important Safety Disclaimer - Brake Parts Fitment Installation: Before purchase or installation, it is your responsibility to confirm that your bike model is listed in the product fitment table. Incorrect fitment can cause serious safety risks. If you're unsure or need a hand, we are here to help - just reach out and we will gladly assist you in confirming compatibility.
Brake components are critical to safety and must be installed by a certified mechanic. Improper installation can lead to brake failure, injury, or death. By purchasing, you accept full responsibility. While we are always happy to support you with guidance, we cannot be held liable for any issues resulting from incorrect installation or use.
Details
Brake Caliper Seal Set
- 1 x Pressure seal, 1 x Dust seal
- Internal Diameter = 43.0mm
- For use on O.D pistons 43.0mm
EPDM Seals - EPDM is the only choice for seals in braking systems using a glycol-based or silicone-based DOT-approved or pure racing brake fluid. If a seal is made for automotive brake systems and the material is not specified, you can safely assume it is EPDM.
Includes Red Rubber Grease We include our red rubber grease specially designed for brake projects, providing lubrication for assembly, protect from dry burn, and prevent swelling and hardening of rubber hydraulic component seals.
Important Safety Disclaimer - Brake Parts Fitment Installation: Before purchase or installation, it is your responsibility to confirm that your bike model is listed in the product fitment table. Incorrect fitment can cause serious safety risks. If you're unsure or need a hand, we are here to help - just reach out and we will gladly assist you in confirming compatibility.
Brake components are critical to safety and must be installed by a certified mechanic. Improper installation can lead to brake failure, injury, or death. By purchasing, you accept full responsibility. While we are always happy to support you with guidance, we cannot be held liable for any issues resulting from incorrect installation or use.
Confirm the right fit
Installation resources
Install with confidence
Explore BrakeCrafters’ installation videos, product demonstrations and how-to guides.
Browse installation videosBrake components must be fitted by a qualified mechanic. Use instructions appropriate to your part and motorcycle.
Workshop essentials
Complete the job
Workshop tools and service essentials. Check each item’s requirements for your job.


BrakeCrafters 90 Degree Internal Circlip Pliers - Long Nose Snap Ring Pliers for Master Cylinders
Selected total: $ 0.00
Recently viewed
Fast shipping
Free US shipping over $75
Quality guarantee
Products selected for dependable performance
Technical expertise
Real help with parts and fitment
Secure checkout
Shop confidently on every device