
Front Brake Master Cylinder Rebuild Kit with Reservoir for Honda Goldwing GL1100, CB750, CM450, Nighthawk 450, CX500, CB650
View the Fitment tab below for compatible motorcycles and fitment notes.
Worn master cylinder seals cause a soft, spongy brake lever, fluid leaks and inconsistent braking. This BrakeCrafters front brake master cylinder rebuild kit with reservoir restores firm, consistent hydraulic pressure on your Honda Goldwing GL1100, CB750, CM450, Nighthawk 450, CX500, CB650, Hawk 450, CM400, Hawk 400 (select 1981-1983 models) with high-quality, durable replacement components. It includes a new master cylinder piston (15.8 mm OD x 41.6 mm long) along with fresh seals and hardware for a complete rebuild of your front brake master cylinder. A new reservoir is included, so you can replace a cracked, cloudy or leaking original at the same time. Red rubber grease is included for assembly. Bleed the system with fresh fluid after the rebuild for best results.
Details
Worn master cylinder seals cause a soft, spongy brake lever, fluid leaks and inconsistent braking. This BrakeCrafters front brake master cylinder rebuild kit with reservoir restores firm, consistent hydraulic pressure on your Honda Goldwing GL1100, CB750, CM450, Nighthawk 450, CX500, CB650, Hawk 450, CM400, Hawk 400 (select 1981-1983 models) with high-quality, durable replacement components. It includes a new master cylinder piston (15.8 mm OD x 41.6 mm long) along with fresh seals and hardware for a complete rebuild of your front brake master cylinder. A new reservoir is included, so you can replace a cracked, cloudy or leaking original at the same time. Red rubber grease is included for assembly. Bleed the system with fresh fluid after the rebuild for best results.
Confirm the right fit
OD =15.8 mm x Length 41.6 mm,
1 x Return Spring,
1 x Primary Seal,
1 x Secondary Seal,
1 x Gaitor Boot,
1 x Circlip,
1 x Reservoir Cup,
1 x Diaphragm,
1 x Reservoir Cap,
1 x Joint Seal /O-Ring,
2 x Reservoir Screws,
2 x Copper Crush Washers,
1 x Pot of Red Rubber Grease
Installation resources
Install with confidence
Explore BrakeCrafters’ installation videos, product demonstrations and how-to guides.
Browse installation videosBrake components must be fitted by a qualified mechanic. Use instructions appropriate to your part and motorcycle.
Workshop essentials
Complete the job
Workshop tools and service essentials. Check each item’s requirements for your job.


BrakeCrafters 90 Degree Internal Circlip Pliers - Long Nose Snap Ring Pliers for Master Cylinders
Selected total: $ 0.00
Recently viewed
Fast shipping
Free US shipping over $75
Quality guarantee
Products selected for dependable performance
Technical expertise
Real help with parts and fitment
Secure checkout
Shop confidently on every device