
Clutch Master Cylinder + Slave Cylinder Rebuild Kit for Kawasaki Concours 1000, ZRX1200, Ninja ZX-7R, Ninja ZX-11, ZRX1100
View the Fitment tab below for compatible motorcycles and fitment notes.
Worn hydraulic seals cause a dragging or slipping clutch, a lever that slowly sinks toward the bar, or fluid weeping around the slave cylinder. Bring back a smooth, consistent clutch pull on your Kawasaki Concours 1000, ZRX1200, Ninja ZX-7R, Ninja ZX-11, ZRX1100, Ninja ZX-9R, GPz1100, Ninja ZX7RR, ZR1100, Ninja 750R, Ninja ZX-10 (select 1986-2005 models) with this BrakeCrafters Clutch Master Cylinder + Slave Cylinder Rebuild Kit. High-quality, durable replacement seals restore a precise fit in your clutch master and slave cylinders, stopping leaks and keeping hydraulic pressure where it belongs. This kit also includes a clutch master cylinder rebuild kit (BC161M) so you can rebuild both ends of the clutch hydraulics at the same time. Bleed the system with fresh fluid after the rebuild for best results.
Details
Worn hydraulic seals cause a dragging or slipping clutch, a lever that slowly sinks toward the bar, or fluid weeping around the slave cylinder. Bring back a smooth, consistent clutch pull on your Kawasaki Concours 1000, ZRX1200, Ninja ZX-7R, Ninja ZX-11, ZRX1100, Ninja ZX-9R, GPz1100, Ninja ZX7RR, ZR1100, Ninja 750R, Ninja ZX-10 (select 1986-2005 models) with this BrakeCrafters Clutch Master Cylinder + Slave Cylinder Rebuild Kit. High-quality, durable replacement seals restore a precise fit in your clutch master and slave cylinders, stopping leaks and keeping hydraulic pressure where it belongs. This kit also includes a clutch master cylinder rebuild kit (BC161M) so you can rebuild both ends of the clutch hydraulics at the same time. Bleed the system with fresh fluid after the rebuild for best results.
Confirm the right fit
1 x Clutch Pushrod Oil Seal,
1 x Spring,
1 x Bleeder Bolt Cap,
1 x Master Cylinder Piston,
OD = 14.0 mm x Length 39.0 mm,
1 x Return Spring,
1 x Seal,
1 x Gaitor Boot,
1 x Washer,
1 x Pushrod,
1 x Circlip,
1 x Pot of Red Rubber Grease
Installation resources
Install with confidence
Explore BrakeCrafters’ installation videos, product demonstrations and how-to guides.
Browse installation videosBrake components must be fitted by a qualified mechanic. Use instructions appropriate to your part and motorcycle.
Workshop essentials
Complete the job
Workshop tools and service essentials. Check each item’s requirements for your job.


BrakeCrafters 90 Degree Internal Circlip Pliers - Long Nose Snap Ring Pliers for Master Cylinders
Selected total: $ 0.00
Recently viewed
Fast shipping
Free US shipping over $75
Quality guarantee
Products selected for dependable performance
Technical expertise
Real help with parts and fitment
Secure checkout
Shop confidently on every device